Page 170 Operator‘s Manual FERITSCOPE
®
FMP30
Instrument Settings - Service Function Menu
ENTER When changing to a different measuring
mode, the instrument will b re-initialized
( 10.2.8 ‘Re-Initialization of the Instru-
ment’, beginning on Page 152).
[Yes: DEL]: Press DEL to carry out the re-
initialization.
[No: ENTER]: Press ENTER to not carry
out the re-initialization.
Press DEL only if the re-initialization is indeed desired!
Key sequ. /
Action
Detail of the display Explanation
DEL After the re-initialization, the number of Ap-
plications and the number of blocks must
entered when changing to the matrix mea-
suring mode.
This automatically specifies the max. num-
ber of measurements that can be stored in
one block.
Enter the values for the number of Applica-
tions and the number of blocks by pressing
the arrow keys
or and confirm the re-
spective entries with ENTER.
Key sequ. /
Action
Detail of the display Explanation
To Next Page
Loading...