Fisher FERITSCOPE FMP30 - List of Set up Applications

Page 42 Operator‘s Manual FERITSCOPE
®
FMP30
Applications
5.4 List of Set Up Applications
DEL Use DEL to start the deletion process. Press-
ing DEL again: Deletes the Application.
ENTER: Cancels the deletion.
It is now possible to select a different Appli-
cation ( Page 40) or to set up a new Ap-
plication ( Page 37).
Key sequ. /
Action
Detail of the display Explanation
APPL No Use APPL No to start the selection of the
Application.
[sheet]: Assigned Application designation
(Example; appears only if an Application
designation has been assigned
( 5.5 ‘Assigning Application Designa-
tions’, beginning on Page 44). If an Appli-
cation designation has not been assigned,
the following will appear immediately on
the display:
[Appl:]: Application number
[n=]: Number of the measurements stored
in the Application
Key sequ. /
Action
Detail of the display Explanation