Page 18 Operator‘s Manual FERITSCOPE
®
FMP30
Description of the Instrument
2.4 Technical Data
Instrument model
FERITSCOPE
®
FMP30
Display Graphical backlit display
Measurable coat-
ings
-Ferrite content measurements in weld seams and clad-
dings made of austenitic or duplex steel
Determination of the portion of deformation martensite in
austenitic materials
Measuring modes Magnetic induction measurement method
Dimensions Instrument: 170 mm x 90 mm x 35 mm (L x W x H)
Display: 44 mm x 57 mm (L x W)
Weight approx. 340 g (without probe, ready to operate)
Permissible ambient
temperature during
operation
+10 °C ... +40 °C
Permissible storage
temperature
+ 5 C°... + 60 °C
Permissible relative
air humidity
30 ... 90% (non-condensing)
Power
supply
4 x 1.5 V batteries with about 50 h service life,
(Size AA or Mignon) or
4 x 1.5 V NiMH rechargeable batteries with about 45 h
service life at 2100 mAh, (Size AA or Mignon)
AC adapter 9 V 150 mA, 100V - 230 V
Power consumption 0.3 W with the display not illuminated
0.5 W with the display illuminated
Connectors Probe:10-pin round plug
AC adapter:2-pin barrel connector
Mini USB port for connecting a printer and a PC
Minimum
time between two
measurements
About 0.2 seconds in the free-running mode
Minimum
lift-off distance be-
tween two measure-
ments
min. 25 mm
To Next Page
Loading...