F E R I T S C O P E
®
F M P 30
Instrument for measurement of the ferrite content in austenitic and duplex steel.
Document order number: 902-097
Issue date: 06-2016
On our home page www.helm
ut-fischer.com you will find the addresses of our
sole agencies and subsidiary companies around the globe.
© 2016 by Helmut Fischer GmbH Institut für Elektronik und Messtechnik, Ger-
many.
This operator’s manual r
emains the copyrighted property of Helmut Fischer Gm-
bH. All rights reserved. This manual may not be reproduced by any means (print,
photocopy, microfilm or any other method) in full or in part, or processed, multi-
plied or distributed to third parties by electronic means without the written con-
sent of Helmut Fischer GmbH.
Subject to correction and technical changes.
FERITSCOPE
®
is a registered trade mark of the Helmut Fischer GmbH Institut
für Elektronik und Messtechnik in Germany and/or other countries.
Bluetooth® is a registered trade mark of the Bluetooth SIG, USA.
Note: The fact, that the trademark characters ® and ™ may be missing does not
indicate that such names are free trademarks.
Quality Assurance System of the Helmut Fischer GmbH
DIN EN ISO/IEC
17025
DIN EN ISO
9001:2008
Calibration lab accredited for certified mass per unit area
standards
Management system certified by DNV GL - Business As-
surance
To Next Page
Loading...