Operator‘s Manual FERITSCOPE
®
FMP30 Page 229
Glossary
12.2.2 Standards
/ 12 / DIN 1319, Parts 1, 2 and 3: Basic Concepts in Metrology
/ 13 / DIN EN ISO 2064: Definitions and Conventions Concerning the
Measurement of Coating Thicknesses (previously DIN 50 982,
Part 1)
/ 14 / DIN EN ISO 2178: Measurement of Coating Thicknesses: Magnet-
ic Methods (previously DIN 50 981)
/ 15 / ISO 3534: Statistics; Vocabulary and Symbols
/ 16 / DIN EN ISO 3882: Review of Methods for Coating Thickness Mea-
surements (previously DIN 50 982, Part 2)
/ 17 / DIN ISO 5725: Precision of Test Methods; Determination of Repeat-
ability and Reproducibility Through Round Robin Tests
/ 18 / DIN 50 982, Part 3: Principles of Coating Thickness Measurement:
General Fundamentals - Selection Criteria and Basic Measurement
Procedures
/ 19 / DIN 55 302 Parts 1 and 2: Statistical Evaluation Methods
/ 20 / DIN 55 350: Terminology in Quality Assurance and Statistics
/ 21 / DIN-Taschenbuch 175 - Prüfnormen für metallische und anorgan-
ische nichtmetallische Überzüge - Normen; Berlin, Köln: Beuth Ver-
lag GmbH
/ 22 / DIN-Taschenbuch 223 - Qualitätssicherung und angewandte Statis-
tik - Begriffe; Berlin, Köln: Beuth Verlag GmbH
/ 23 / DIN-Taschenbuch 224 - Qualitätssicherung und angewandte Statis-
tik - Verfahren 1; Berlin, Köln: Beuth Verlag GmbH
/ 24 / IIW Document II-1269-95 (II-C-034-95) - Draft Revision of ISO
8249 - 1985 (E) and II-C-023-94: Welding - Determination of Fer-
rite Number in austenitic and duplex ferritic-austenitic Cr-Ni stain-
less steel weld metal
/ 25 / DIN EN ISO 8249: Welding - Determination of Ferrite Number
(FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel
weld metals
/ 26 / DIN 32 514, Part 1: Determination of the ferrite number in austenit-
ic weld metal
/ 27 / Basel-Standard (BN2)
To Next Page
Loading...