Flexitron Webdyn SunPM - Page 130

contact@webdyn.com | webdyn.com
V2.05 subject to changes | Webdyn © by Flexitron Group
130
The time differences for countries are not taken into account by the concentrator.
NTP:
The NTP settings are:
WEB
INTERFACE
PARAMETER <uid>_
cong.ini conguration le
DESCRIPTION
NTP server 1 NTP_Server1 address for the NTP 1 server used to
synchronise the concentrator clock
NTP server 2 NTP_Server2 NTP 2 server address used to synchronise
the concentrator clock if server 1 did not
respond
If the NTP1 and NTP2 server values are left blank, the concentrator will not use NTP synchronisation.
By default, the concentrator uses the free “pool.ntp.org” NTP server. This server does not
guarantee the exactness of the time synchronisation, nor its robustness. The use of a specic NTP server
is strongly recommended. Contact an NTP server portal or supplier.