contact@webdyn.com | webdyn.com
V2.05 subject to changes | Webdyn © by Flexitron Group
After having entered an NTP server, it can be tested by clicking one of the following buttons:
• “Set time from NTP”: launches NTP1 synchronisation and, if necessary NTP2 synchronisation
and then applies it to the concentrator.
• “Check NTP1”: Tests NTP1 server synchronisation without applying it to the concentrator.
• “Check NTP2”: Tests NTP2 server synchronisation without applying it to the concentrator.
A window opens to display the connection log:
The last line in the log containing the test result is displayed and stored on the main web page. It is also
possible to re-display the last connection log by clicking the “Magnier” button.
The concentrator time can be synchronised with the PC time by clicking the “Set time from PC” button.
The time zone congured in the concentrator is then applied.
To Next Page
Loading...