contact@webdyn.com | webdyn.com
V2.05 subject to changes | Webdyn © by Flexitron Group
4.1.8.2 Script Logs
Each script runs in a separate environment. As a result, they each have an automatically generated log
le when they run.
The log le can be viewed in 2 ways:
• Either directly on the local web site on the script page by clicking the view log icon (see section
“3.2.3.1 Scripts”):
• Or on the server in the log les. The logs displayed below are also available on the server. They
contain the “_LUA_” character string followed by the script name. For the log shown above, the
le name will be “WPM00BDE4_LUA_Test script 1_210211_165930.log.gz” and will contain
exactly what is displayed on the screen.
Note that script log les are in “CSV” format so that they can be imported to spreadsheet software.
4.1.8.3 SunSpec Detection Logs
During a SunSpec detection, the detection result is displayed on the local web page as it progresses:
To Next Page
Loading...
Need help?
General