Flexitron Webdyn SunPM - Page 193

contact@webdyn.com | webdyn.com
V2.05 subject to changes | Webdyn © by Flexitron Group
193
For conguration by SMS, you must not add spaces between the parameters. The syntax must be
strictly identical.
What are the FTP server access identiers?
Access to the FTP server depends on the selected solution.
If you have chosen a portal, it will give you the FTP server access identiers.
If you want to use your own FTP server, contact your network administrator.
For all other congurations, and to determine the best solution, contact the Webdyn sales department
which will advise you and direct you to the relevant contacts: contact@webdyn.com
General gateway use
How do you reinitialise the concentrator?
There are 2 methods to force a concentrator factory reset:
• Press the Factory Reset button on the concentrator for 20 seconds:
Wait. The concentrator will reboot using its factory conguration.
• If a SIM card is installed and congured, a “factory” SMS also enables a factory reset. Simply
send it to the phone number of the SIM card (see chapter 5.3.3: “Factory return command”).
The factory reset restores the original conguration. The data is not kept.