Flexitron Webdyn SunPM - Page 199

contact@webdyn.com | webdyn.com
V2.05 subject to changes | Webdyn © by Flexitron Group
199
FTP_UploadLog Indicates whether the gateway must also upload
the internal programmed connection operating
logs in the FTP 1 server log upload directory. The
possible values are:
•0: no le upload
•1: le upload
0
FTP2_DirAlarm FTP 2 server directory in which the alarms
from the concentrator are stored. Note that the
directory MUST exist. The concentrator will not
create it when uploading les.
/ALARM
FTP2_DirBin FTP 2 server directory in which the concentrator
will get the update les when requested. See the
section on update conguration for how to use
updates.
/BIN
FTP2_DirCert FTP 2 server directory in which the concentrator
will get the certicates to use for MQTT
connections. See the MQTT conguration section
for more details.
/CERT
FTP2_DirCmd FTP 2 server directory in which the concentrator
will get the command les used later. See the
command le conguration use section for more
details.
/CMD
FTP2_DirCong FTP 2 server directory to which the concentrator
uploads its conguration les. Note that the
directory MUST exist. The concentrator will not
create it when uploading les.
See the section on concentrator conguration
using concentrator les for the operating
principle (see section 3.1.2: “Concentrator
operation”).
/CONFIG
FTP2_DirData FTP 2 server directory to which the concentrator
uploads the data les collected during operation.
Note that the directory MUST exist. The
concentrator will not create it when uploading
les.
/DATA