Flexitron Webdyn SunPM User Manual

contact@webdyn.com | webdyn.com
V2.05 subject to changes | Webdyn © by Flexitron Group
43
This section describes all those les.
When the les are modied on the main server, the changes are carried over onto thee congured
secondary server.
3.1.2.1. Concentrator Operation
The concentrator conguration les are located in the indicated conguration directory. By default “/
CONFIG”.
The les are the following:
• <uid>_cong.ini: this le contains the following conguration elements:
• Server tree structure conguration
• Server type conguration: FTP, SFTP, WebDAV, MQTT, etc.
• NTP conguration
• Concentrator name and description
• <uid>_scl.ini: this le contains the conguration parameters for the scripts installed on the
concentrator
• <uid>_var.ini: this le contains the concentrator connection scheduling conguration
parameters
• <uid>_daq.csv: this le contains the concentrator connection and monitored device interfaces,
namely:
• Modem conguration:
• PIN code
• APN
• Login/password/authentication type
• Ethernet interface conguration:
• IP address
• Gateway
• DNS
• Serial port conguration:
• Speed
• Parity
• Data bits
• Protocol type used: Modbus etc.
• Declaration of each connected equipment:
• Index

Flexitron Webdyn SunPM Specifications

General

Brand	Flexitron
Model	Webdyn SunPM
Category	Controller
Language	English