Flexitron Webdyn SunPM - Page 44

contact@webdyn.com | webdyn.com
V2.05 subject to changes | Webdyn © by Flexitron Group
44
• Name
• Interface
• Address
• Denition le
With <uid> the identier of the concentrator.
3.1.2.1.1 “<uid>_cong.ini” le
At least a certain number of parameters must be provided in this conguration le to provide communication
with the concentrator.
First, dene the conguration name: Take the device uid as explained previously and sufx “_cong.ini”
to it. Thus, in the previous example, the generated le name will be “WPM00BDE4_cong.ini”.
If the base conguration is created using the embedded web server, this le is created automatically the
rst time the concentrator connects.
If the le is detected when connecting to the remote server, it is uploaded and the conguration is applied
immediately regardless of the local conguration.
For an FTP or SFTP server:
• SERVER_Address=<Address or name of the FTP/SFTP server to use for the conguration>
• SERVER_TYPE=ftp or sftp
• If the connection is by Ethernet:
• SERVER_Interface=ethernet
• If the connection is by modem:
• SERVER_Interface=modem
• FTP_Login=<Login to use for the server>
• FTP_Password=<Password for the login>
For a WebDAV-HTTPS server:
• SERVER_Address=<WebDAV-HTTPS server address or name>
• SERVER_TYPE=webdav
• If the connection is made by ethernet:
• SERVER_Interface=ethernet
• If the connection is made by modem:
• SERVER_Interface=modem (by default)