EasyManuals Logo

Flexitron Webdyn SunPM User Manual

Flexitron Webdyn SunPM
214 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
contact@webdyn.com | webdyn.com
V2.05 subject to changes | Webdyn © by Flexitron Group
45
Details of the conguration parameters for this le can be found in section 10.1 Appendix A: “_cong.ini”
conguration le.
For an MQTT server:
The WebdynSunPM can connect to an MQTT server in order to upload its data and alarms. It is also
possible to issue commands to the hub through the MQTT server. To do this, you must indicate the topics
subscribed to the concentrator in its settings.
The conguration of the concentrator cannot be done by the MQTT server, for this you will have to either
go through an FTP server or use the embedded web interface.
The hub supports 5 different types of MQTT server, which are:
MQTT: MQTT server without security.
MQTTS: secure MQTT server.
MQTTS aws: Amazon’s “AWS IoT” server.
MQTTS gcloud: Google’s “Google Cloud IoT” server.
MQTTS azure: Microsoft’s “Azure IoT Hub” server.
Please contact the MQTT server manager to obtain the settings to be made as well as the certicates and
secure keys to import to the concentrator.
Details of the conguration parameters for this le can be found in section 10.1 Appendix A: “_cong.ini”
conguration le.
For MQTTS servers, certicates must be imported into the concentrator. These certicates have a
lifespan, it is your responsibility to renew them and import them before they expire.
3.1.2.1.2 “<uid>_var.ini” le
The “_var.ini” le contains the scheduling list congured on the concentrator.
The le name is dened as follows: Take the device uid as explained previously and sufx “_var.ini” to it.
Thus, in the previous example, the generated le name will be “WPM00BDE4_var.ini”.
If the base conguration is created using the embedded web server, this le is created automatically the
rst time the concentrator connects.
If the le is detected when connecting to the remote server, it is uploaded and the conguration is applied
immediately regardless of the local conguration.
The le has one row per congured schedule. Each row contains the schedule number with its
corresponding parameters.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Flexitron Webdyn SunPM and is the answer not in the manual?

Flexitron Webdyn SunPM Specifications

General IconGeneral
BrandFlexitron
ModelWebdyn SunPM
CategoryController
LanguageEnglish