Flexitron Webdyn SunPM - Page 46

contact@webdyn.com | webdyn.com
V2.05 subject to changes | Webdyn © by Flexitron Group
46
The format is the following:
VARIABLE DEFINITION DEFAULT VALUE
SCHEDULE_Params[n] Schedule parameters for the Server 1
connection
SCHEDULE2_Params[n] Schedule parameters for the Server 2
connection
Where “n” is replaced by the schedule index number. The number starts at 0.
The parameters for each row are in the following format:
SCHEDULE_Params[index]=Id|Type|StartTime|Interval|Count
Each congured row therefore contains the following conguration information:
PARAMETER DEFINITION DEFAULT VALUE
Id Conguration line identier. Identier must be unique
Type Indicates the schedule type. The authorised values are:
•everyday: the schedule will be run every day
•Monday: the schedule will be run every Monday
•Tuesday: the schedule will be run every Tuesday
•Wednesday: the schedule will be run every Wednesday
•Thursday: the schedule will be run every Thursday
•Friday: the schedule will be run every Friday
•Saturday: the schedule will be run every Saturday
•Sunday: the schedule will be run every Sunday
•rst: the schedule will be run on the 1st of the month
•middle: the schedule will be run on the 15th of the
month
•last: the schedule will be run on the last day of the
month
Everyday
StartTime Indicates the task start time in the following format:
“HH:MM:SS”
00:00:00
Interval Indicates the connection repeat interval in minutes 1440
Count Indicates the maximum number of connections in one
day
1