Flowserve MX User Manual

Limitorque
®
MX Electronic Actuator FCD LMENIM2306-09-AQ – 08/17
3
flowserve.com
4.4.1 Close Direction 43
4.4.2 Close Seating 43
4.4.3 Open Seating 43
4.5 Torque Switch Timer 44
4.5.1 Status 44
4.5.2 Torque Timer 44
4.6 Torque Setup 45
4.6.1 Close Torque Valve or Open Torque Valve 45
4.7 Position Setup 46
4.7.1 Set Position Limits for Electrical Operation 46
4.7.2 Set Position Limits for Manual Operation 46
4.8 Modutronic Option 48
4.8.1 Status 48
4.8.2 Proportional Band 48
4.8.3 Fail Position 48
4.8.4 Deadband 48
4.8.5 Polarity (20 mA) 48
4.8.6 Delay After Stop 49
4.8.7 4-20 mA Signal Range 49
4.8.8 Set High Reference 49
4.8.9 Set Low Reference 49
4.8.10 Modutronic LCD Display 50
4.9 DDC/Modbus Option 50
4.9.1 Status 50
4.9.2 Network Address 51
4.9.3 Protocol 51
4.9.4 Analog Scale 51
4.9.5 ESD Action 51
4.9.6 Proportional Band 52
4.9.7 Deadband 52
4.9.8 Offset 52
4.9.9 Move To 52
4.9.10 Comm Loss Delay 52
4.9.11 Comm Loss Action 52
4.10 FF Option 52
4.10.1 Status 53
4.10.2 Terminate Bus 53
4.10.3 Analog Scale 53
4.10.4 ESD Action 53
4.10.5 OPEN/CLOSE Mode 53
4.10.6 Proportional Band 53
4.10.7 Deadband 53
4.10.8 Comm Loss Delay 54
4.10.9 Comm Loss Action 54
4.11 PB Option 54
4.11.1 Status 55
4.11.2 PB DP Operation 55
4.11.3 Comm Loss Delay 56
4.11.4 Comm Loss Action 56
4.12 DN Option 57
4.12.1 Status 57
4.12.2 Baud Rate 57
LMENIM2306-09 AQ.indd 3 Mittwoch23.08.17 08:53

Flowserve MX Specifications

General

Brand	Flowserve
Model	MX
Category	Controller
Language	English