Flowserve MX User Manual

Limitorque
®
MX Electronic Actuator FCD LMENIM2306-09-AQ – 08/17
4
4.12.3 Network Address 57
4.12.4 Analog Scale 57
4.12.5 ESD Action 57
4.12.6 Proportional Band 58
4.12.7 Deadband 58
4.12.8 Comm Loss Delay 58
4.12.9 Comm Loss Action 58
4.13 HART Option 59
4.13.1 Status 59
4.13.2 Multi-drop 59
4.13.3 Input Action 60
4.13.4 Fail Position 60
4.13.5 Polling Address 60
4.13.6 Save Settings 60
4.13.7 Change Prop/Deadband 60
4.13.8 ESD Action 60
4.13.9 Change clock 61
4.14 Status and Alarm Contacts 61
4.14.1 Status and Alarm Contact Default Settings 61
4.14.2 Status Function 62
4.14.3 Contact 62
4.14.4 Valve Position 63
4.15 Two-speed Timer (Optional) 63
4.15.1 Status 63
4.15.2 Start Position 63
4.15.3 Stop Position 63
4.15.4 Pulse Time – ON 63
4.15.5 Pulse Time – OFF 64
4.16 Analog Output 64
4.16.1 APT Polarity Option 67
4.16.2 ATT Polarity Option 67
4.17 Remote Mode 68
4.17.1 Local Control 68
4.17.2 LED Customization 69
4.18 ESD (Emergency Shutdown) Overrides 69
4.18.1 ESD Override 69
4.18.2 Inhibit 70
4.18.3 Local Command 70
4.18.4 Stop 70
4.18.5 Jammed Valve* 70
4.18.6 Lost Phase* 70
4.18.7 Overtorque* 71
4.18.8 Motor Thermostat 71
4.18.9 Oil Over Temperature 71
4.18.10 Two-speed Timer 71
4.18.11 Network ESD 71
4.18.12 Torque Switch Timer 72
4.19 Inputs 72
4.19.1 Input Standard Remote Control 72
4.19.2 Status 73
LMENIM2306-09 AQ.indd 4 Mittwoch23.08.17 08:53

Flowserve MX Specifications

General

Brand	Flowserve
Model	MX
Category	Controller
Language	English