SC600 Option
SC600 Specifications
6
6-11
6-12. Trigger Signal Specifications (Edge Function)
Table 6-9. Trigger Signal Specifications (Edge Function)
Edge Signal
Frequency
Division
Ratio
Typical Amplitude
into 50Ω (p-p)
Typical Rise Time Typical Lead Time
1 kHz to 10 MHz off/1 ≥ 1 V ≤ 2 ns 40 ns
6-13. Trigger Signal Specifications (Square Wave Voltage Function)
Table 6-10. Trigger Signal Specifications (Square Wave Voltage Function)
Edge Signal
Frequency
Division
Ratio
Typical Amplitude
into 50Ω (p-p)
Typical Rise Time Typical Lead Time
10 Hz to 10 kHz off/1 ≥ 1 V ≤ 2 ns 1 µs
6-14. Trigger Signal Specifications
Table 6-11. TV Trigger Signal Specifications
Trigger Signal Type Parameters
Field Formats Selectable NTSC, SECAM, PAL, PAL-M
Polarity Selectable inverted or uninverted video
Amplitude into 50 Ω (p-p) Adjustable 0 to 1.5 V p-p into 50 ohm load, (±7% accuracy)
Line Marker Selectable Line Video Marker
6-15. Oscilloscope Input Resistance Measurement Specifications
Table 6-12. Oscilloscope Input Resistance Measurement Specifications
Scope input selected 50Ω 1 MΩ
Measurement Range 40Ω to 60Ω 500 kΩ to 1.5 MΩ
Uncertainty 0.1 % 0.1 %
6-16. Oscilloscope Input Capacitance Measurement Specifications
Table 6-13. Oscilloscope Input Capacitance Measurement Specifications
Scope input selected 1 MΩ
Measurement Range 5 pF to 50 pF
Uncertainty ± (5% of input + 0.5 pF) [1]
[1] Measurement made within 30 minutes of capacitance zero reference. SC600 option must be
selected for at least five minutes prior to any capacitance measurement, including the zero process.
To Next Page
Loading...
