Fluke 5520A - 1-1. Introduction

Introduction and Specifications
Introduction
1
1-3
1-1. Introduction
The Fluke Model 5520A Multi-Product Calibrator (Figure 1-1) is a precise instrument
that calibrates a wide variety of electrical measuring instruments. With the 5520A
Calibrator, you can calibrate precision multimeters that measure ac or dc voltage, ac or dc
current, ac or dc power, resistance, capacitance, and temperature. The 5520A can display
pressure measurements when used with a Fluke 700 Series Pressure Module. With the
SC600 and SC300 Oscilloscope Calibration options, you can use the 5520A Calibrator to
calibrate analog and digital oscilloscopes. Specifications are provided in this chapter
(specifications for the oscilloscope calibration options are provided in Chapter 6).
XWWarning
If the 5520A Calibrator is operated in any way not specified by
this manual or other documentation provided by Fluke, the
protection provided by the Calibrator may be impaired.
0•
123
456
789
ENTER
M
k
m
VHz
FIELD
EDIT
/
+
F
OPRSTBY EARTH
SCOPE
EXGRD
MENU
PREV
SHIFT
RESET
CE
SETUP
REF
NEW
TC
MEAS
¡F
µ
n
p
W
dBm sec
¡C
POWER
A
MULT
x
DIV
÷
MODES
MORE
5520A
CALIBRATOR
HI
LO
TRIG
GUARD
TC
20A
NORMAL AUX
SCOPE
OUT
V, , ,
RTD
A, -SENSE,
AUX V
20V PK MAX
20V PK MAX
yg030f.eps
Figure 1-1. 5520A Multi-Product Calibrator