Fluke 5520A - Page 253

Index (continued)
3
Required equipment for calibration and verification,
3-3
resistance
specifications, 1-11
Resistance
Verification, 3-39
—S—
SC300. Seealso
Calibration, 6-65, 6-76
Error Message indicating not installed, 6-65
Hardware adjustments, 6-107
Maintenance, 6-65
Theory of Operation, 6-71
User’s servicing abilities, 6-65
Verification, 6-83
SC600. See
Calibration, 6-5, 6-17
Error Message indicating not installed, 6-5
Hardware adjustments, 6-57
Maintenance, 6-5
Theory of Operation, 6-12
User’s servicing abilities, 6-5
Verification, 6-28
SC600 Specifications, 6-6
Scope Calibration. See SC300. See SC600
Service information, 1-5
specifications, 1-6
ac current (non-sinewave), 1-29
ac current (sinewave), 1-14
ac current (sinewave) extended bandwidth, 1-28
ac current, squarewave characteristics (typical),
1-31
ac current, trianglewave characteristics (typical),
1-31
ac power (45 Hz to 65 Hz) summary, 1-19
ac voltage
dc offset, 1-27
ac voltage (non-sinewave), 1-26
ac voltage (sinewave), 1-12
ac voltage (sinewave) extended bandwidth, 1-25
ac voltage, squarewave characteristics, 1-28
ac voltage, trianglewave characteristics (typical),
1-28
additional, 1-23
capacitance, 1-16
dc current, 1-9, 1-10
dc power summary, 1-19
dc voltage, 1-8
frequency, 1-23
general, 1-7
harmonics (2nd - 50th), 1-24
phase, 1-21
power and dual output limit, 1-20
power uncertainty, 1-22
resistance, 1-11
temperature calibration (RTD), 1-18
temperature calibration (thermocouple), 1-17
Specifications
SC600, 6-6
Square Wave Voltage Function
Trigger Specifications, 6-11
Synthesized Impedance assembly (A5)
Theory, 2-4
—T—
temperature
calibration (RTD) specifications, 1-18
calibration (thermocouple) specifications, 1-17
Thermocouple Measurement
Verification, 3-53
Thermocouple Simulation (Sourcing)
Verification, 3-53
Time Marker function
Theory of Operation, 6-13, 6-72
Verification, 6-48, 6-103
Time Marker Function
Specifications, 6-9, 6-69
Trigger Specifications, 6-10
Trigger Specifications, 6-70
TV Trigger Specifications, 6-11
—V—
Verification, 3-35
SC300, 6-83
AC Voltage frequency, 6-89
DC Voltage, 6-78, 6-83
Edge Duty Cycle, 6-92
Edge Frequency, 6-91
Edge rise time, 6-92
Leveled Sine Wave Amplitude, 6-95
Leveled Sine Wave Frequency, 6-96
Leveled Sine Wave Harmonics, 6-97
Time Marker, 6-103
Wave Generator, 6-104
SC600, 6-28
AC Voltage frequency, 6-34
DC Voltage, 6-21, 6-29
Edge Duty Cycle, 6-36
Edge Frequency, 6-35
Edge rise time, 6-36
Leveled Sine Wave Amplitude, 6-39
Leveled Sine Wave Frequency, 6-41
Leveled Sine Wave Harmonics, 6-42
MeasZ Capacitance, 6-55
MeasZ Resistance, 6-54
Overload function, 6-56
Pulse period, 6-54
Pulse width, 6-53
Time Marker, 6-48
Wave Generator, 6-48
Volt Function