Fluke 6270A - Contact Fluke Calibration; Safety Information

6270A
Service Manual
2
Contact Fluke Calibration
To contact Fluke Calibration, call one of the following telephone numbers:
• Technical Support USA: 1-877-355-3225
• Calibration/Repair USA: 1-877-355-3225
• Canada: 1-800-36-FLUKE (1-800-363-5853)
• Europe: +31-40-2675-200
• Japan: +81-3-6714-3114
• Singapore: +65-6799-5566
• China: +86-400-810-3435
• Brazil: +55-11-3759-7600
• Anywhere in the world: +1-425-446-6110
To see product information or download manuals and the latest manual
supplements, visit Fluke Calibration’s website at www.flukecal.com.
To register your product, visit http://flukecal.com/register-product.
Safety Information
A Warning identifies conditions and procedures that are dangerous to the user.
A Caution identifies conditions and procedures that can cause damage to the
Product or the equipment under test.
Warnings
To prevent possible electrical shock, fire, or personal injury:
• Only assemble and operate high-pressure systems if you
know the correct safety procedures. High-pressure liquids
and gases are hazardous and the energy from them can be
released without warning.
• Read all safety information before you use the Product.
• Carefully read all instructions.
• Do not use the Product around explosive gas, vapor, or in
damp or wet environments.
• Do not operate the Product with covers removed or the case
open. Hazardous voltage exposure is possible. Pressure
modules may be exchanged through the front panel while
the Product is turned on.
• Use this Product indoors only.
• Do not put the Product where access to the mains power
cable is blocked.
• Use only the mains power cable and connector approved for
the voltage and plug configuration in your country and rated
for the Product.