Fluke-062, -102, -104, -202, -204, -502, -504
Service Manual
1-6
• Use the product only as specified, or the protection
supplied by the product can be compromised.
• Carefully read all instructions.
• Do not use the product if it operates incorrectly.
• Do not use the product or its accessories in case of any
damage.
• Disable the product or its accessories in case of any
damage.
• Keep fingers behind the finger guards on the probes.
• Use only correct measurement category (CAT), voltage,
and current rated probes, test leads, and adapters for the
measurement.
• Do not exceed the Measurement Category (CAT) rating of
the lowest rated individual component of a product, probe,
or accessory.
• Do not use the product around explosive gas, vapor, or in
damp or wet environments.
• Measure a known voltage first to make sure that the
product operates correctly.
• Examine the case before you use the product. Look for
cracks or missing plastic. Carefully look at the insulation
around the terminals.
• Do not work alone.
• Comply with local and national safety codes. Use personal
protective equipment (approved rubber gloves, face
protection, and flame resistant clothes) to prevent shock
and arc blast injury where hazardous live conductors are
exposed.
• The battery door must be closed and locked before you
operate the product.
• Do not operate the product with covers removed or the
case open. Hazardous voltage exposure is possible.
• Remove the input signals before you clean the product.
• Use only specified replacement parts.
• Use of the product in a manner not specified may impair
the protection provided by the equipment.
• Do not use test leads if they are damaged. Examine the test
leads for damaged insulation, exposed metal, or if the wear
indicator shows.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
