EasyManua.ls Logo

FORST ST6D42 - Draining the Hydraulic Oil

Default Icon
138 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Redwood Global Ltd - ST6D42
Operator and Maintenance Manual
Chapter 5: Maintenance
5.16 DRAINING THE HYDRAULIC OIL
CAUTION
Use suitable protective gloves to avoid contact with skin.
CAUTION
Use suitable protective eye wear to protect eyes from contact with oil.
CAUTION
Use approved local authority environmental procedures when disposing of
fluids.
You may need to drain the hydraulic oil from the machine if:
l
A leak has been detected on the machine
l
The machine needs servicing
l
The machine needs maintenance
1. Stop the engine.
2. Remove the ignition key and keep in a safe place.
3. Remove the hydraulic oil filter from its housing.
4. Using a suitable tool capable of sucking oil, insert the tool into the hydraulic oil
filter housing and suck the old oil out of the tank.
5. Dispose of the old oil safely and correctly.
12-00-004 v2.1 112

Table of Contents

Related product manuals