Redwood Global Ltd - ST6D42
Operator and Maintenance Manual
Chapter 6: Troubleshooting
Possible cause Check Corrective action
No stress occurring too soon Check main belts Tension correctly
Low RPM Check throttle Adjust as required
Blade condition Check blade sharpness Replace if dull
6.7 HYDRAULIC OIL IS LEAKING
Possible cause Check Corrective action
Hydraulic oil level is too high Check hydraulic oil level Drain to correct level
Loose hydraulic fitting Locate leaking fitting Tighten or replace fitting
6.8 THE TYRES ARE WEARING UNEVENLY
Possible cause Check Corrective action
Incorrect tyre pressure Check tyre pressures Adjust to 2.76 bar (40psi)
Loose wheel nuts Check wheel nut torque
settings
Adjust to 90Nm
Damaged wheel bearings Check bearing free play Contact repair agent
NOTICE
If any of these issues persist, contact FörstAssist immediately.
12-00-004 v2.1 128