FORST ST6D42 - Chapter 5: Maintenance

79 12-00-004 v2.1
CHAPTER 5: MAINTENANCE
In this chapter:
5.1 Routine maintenance 81
5.2 Daily checks 83
5.3 Weekly maintenance checks 85
5.4 Engine maintenance 87
5.5 Routine cleaning 87
5.5.1 Pressure washing 87
5.6 Aftertreatment System 88
5.6.1 Diesel particulate filter (DPF) 88
5.6.2 DPF regeneration 88
5.6.3 Stage V DPF regeneration 89
5.6.4 DPF regeneration methods 90
5.6.5 DPF regeneration lamp and switch 91
5.6.6 Regeneration mode during operation (passive and active regeneration) 92
5.6.7 Manual regeneration mode (forced regeneration) 92
5.6.8 Conditions for forced regeneration 92
5.6.9 Removal 92
5.6.10 Removing ash and cleaning the DPF 93
5.7 Opening the bonnet 94
5.8 Opening the chipping chamber cover 95
5.9 Removing the panel 97
5.10 Changing the blades 98
5.11 About blade sharpening 102
5.12 Turning or replacing the main anvil 104
5.13 Adjusting the main belt tension 107
5.14 Hydraulic oil filter 110
5.15 Changing the hydraulic filter 111
5.16 Draining the Hydraulic Oil 112
5.17 Battery 113
5.17.1 First aid 113
5.17.2 Going into long term storage 113