Redwood Global Ltd - ST6D42
Operator and Maintenance Manual
Chapter 4: Operation
4.6 SHUTTING DOWN THE MACHINE
To shut down safely, follow the procedure below.
NOTICE
Increase and decrease the engine speed slowly, especially during the first 50
hours of operation.
1. Reduce the speed to idle.
Figure 40 - Idle
2. Allow the engine to run unloaded and idle for 30seconds.
3. Turn the key 90° anticlockwise.
Figure 41 - Key in the OFF position
4. Wait until the engine comes to a complete stop.
5. Remove the ignition key and keep it in a safe place.
12-00-004 v2.1 74
To Next Page
Loading...
