Redwood Global Ltd - ST6D42
Operator and Maintenance Manual
Chapter 3: Transportation and storage
3.6.4 TAKE OUT OF STORAGE
1. Remove any covers.
2. Examine all fluid levels. If necessary replace the fluid or add more fluid.
3. Check the pressure and condition of the tyres.
4. Clean the machine to remove all unwanted material and corrosive products. Dry
the machine to remove solvents and moisture.
5. Install a charged battery.
6. Start the engine.
7. Operate the feed roller controls. Make sure that the feed roller functions operate
correctly.
12-00-004 v2.1 64
To Next Page
Loading...
