Redwood Global Ltd - ST6D42
Operator and Maintenance Manual
Chapter 6: Troubleshooting
Possible cause Check Corrective action
Flow control valve Check valve is free to rotate Set the dial to 5
E-stop button depressed Check E-stop button Reset E-stop button
Faulty stop bar or hopper tray
sensor
Check stop bar sensor
Check hopper tray sensor
Perform a function check.
When the ignition is on and
there is metal in front of the
sensor, the orange indicator
light is OFF
Replace sensor if damaged or
not working
12-00-004 v2.1 126
To Next Page
Loading...
