FORST ST6D42 - Page 136

L
Left-hand and right-hand side15
M
Machine Information34
Machine lifting59
Manual regeneration mode (forced
regeneration)92
Manufacturer’s Statutory Plate40
N
Navigation31
Noise test information49
O
Obtaining documentation and
information15
Oils, fluids and lubricants117
Opening the Bonnet94
Opening the chipping chamber
cover95
P
Positioning the machine for use67
Preparation for use66
Preparing the machine for storage63
Pressure Washing87
Purpose of these instructions13
Put into storage63
R
Red stop bar26
Regeneration mode during operation
(passive and active
regeneration)92
Removal92
Removing ash and cleaning the DPF93
Removing the discharge chute60
Removing the panel97
Replacing the battery114
Routine Cleaning87
Routine maintenance81
Running gear – hitch & axle120
S
Safe working44
Safety & function test71
Sensors and DPF33
Service History133
Settings37
Shutting down the74
Stage V DPF regeneration89
Starting the69
Storage63
T
Take out of storage64
Technical19
The display screen is blank125
The engine cranks but doesn't fire124
The engine doesn't crank124
The feed rollers are not turning125
The tyres are wearing unevenly128
The woodchipper is struggling to chip
wood127
The woodchipper suddenly stops
running127
Tools and accessories119
Towing the Machine57
Trademarks3
Turning or replacing the main anvil104
V
Vehicle identification number41
W
Warranty131
Redwood Global Ltd - ST6D42
Operator and Maintenance Manual
Index
12-00-004 v2.1 136