FORST ST6D42 - Page 5

Chapter 3: Transportation and storage 53
3.1 Connecting to the tow vehicle 54
3.2 Towing the Machine 57
3.3 Disconnecting from the tow vehicle 58
3.4 Machine lifting 59
3.5 Removing the discharge chute 60
3.6 Storage 63
3.6.1 Preparing the machine for storage 63
3.6.2 Put into storage 63
3.6.3 During storage 63
3.6.4 Take out of storage 64
Chapter 4: Operation 65
4.1 Preparation for use 66
4.2 Positioning the machine for use 67
4.3 Starting the Machine 69
4.4 Safety & function test 71
Green and orange hopper buttons 71
4.5 Feed roller speed adjustment 73
4.6 Shutting down the machine 74
4.7 Removing blockages 75
Chapter 5: Maintenance 79
5.1 Routine maintenance 81
5.2 Daily checks 83
5.3 Weekly maintenance checks 85
5.4 Engine maintenance 87
5.5 Routine cleaning 87
5.5.1 Pressure washing 87
5.6 Aftertreatment System 88
5.6.1 Diesel particulate filter (DPF) 88
5.6.2 DPF regeneration 88
5.6.3 Stage V DPF regeneration 89
5.6.4 DPF regeneration methods 90
5.6.5 DPF regeneration lamp and switch 91
5.6.6 Regeneration mode during operation (passive and active
regeneration) 92
5.6.7 Manual regeneration mode (forced regeneration) 92
5.6.8 Conditions for forced regeneration 92
5.6.9 Removal 92
Redwood Global Ltd - ST6D42
Operator and Maintenance Manual
5 12-00-004 v2.1