FORST ST6D42 - Page 51

Decal Description Decal Description
Use only close fitting
gloves, suitable
hearing protection
and eye protection
to protect against
the risk of ejected
material.
Apply 2x parts of
grease to each grease
nipple once a week.
Tighten the
flywheel nuts to
310Nm.

Warning: danger
of cutting
Warning: Do not run
the engine with the
discharge chute
removed.
Use only Diesel
EN590 fuel for this
machine

Pull the E-Stop up to
engage the feed rollers
if feed rollers are
stopped.
Chapter 2: Safety instructions
Redwood Global Ltd - ST6D42
Operator and Maintenance Manual
51 12-00-004 v2.1