MicroLog Plus Chapter 2
103
Click Enable Alarm a second time to disable the Alarm.
Note: To activate the Cradle alarm, use the Setup dialog box
2.2.5. E-mail Alarm Notification
MicroLab Plus can be programmed to send e-mail notifications to
one, or more e-mail addresses whenever any MicroLog readings
exceed its alarm levels. The notifications include the MicroLog
name, the sensor whose alarm level was exceeded and the sensor's
measured value.
To setup MicroLab Plus in order to send e-mail notifications:
1. Click File on the menu bar, then click Mail properties.
2. Check the Send e-mail notification check box.
3. In the Server name box, type the outgoing mail server
name (mandatory).
To Next Page
Loading...