MicroLog Chapter 1
37
1.4.2. Overview
The MicroLab software was designed to allow for the
programming of the desired data recording specifications for
MicroLog, to enable the downloading of recorded data to a PC, and
to store, view and analyze the data.
The Logger menu handles all communication between the PC and
MicroLog such as programming the desired recording mode,
starting or stopping data recording, as well as downloading the
data.
The View menu controls the various data display options. Data can
be viewed in graph format, in table format, or in both. The Data
Map is a separate pane that displays a list of the open data sets. It
can also be used to quickly navigate through the data sets.
To Next Page
Loading...