Chapter 1 MicroLog
34
1.4. Working with the MicroLab Software
1.4.1. Installation
1. System Requirements
To work with MicroLab, your system should be equipped with the
following:
Software
Windows 95, or later (Windows 95 will not support USB)
Internet Explorer 4.0, or later (you can install Internet Explorer 5
when you install MicroLog Plus, since it ships with the product)
Hardware
Pentium 300MHz or higher
32 MB RAM (64 MB recommended)
5MB available disk space for the MicroLab application
To Next Page
Loading...