Chapter 1 MicroLog
20
1.3. Working with MicroLog
1.3.1. Data Displays
1. Current data
When MicroLog is recording, the data from the sensors is
displayed alternately. The data obtained from external sensors is
displayed with a small
EXT symbol.
When MicroLog stores the data, the LCD display briefly changes
to a “double dash” (- -) symbol.
2. Minimum and maximum values
You can display minimum and maximum values for any hour from
the last 24 hours and for any day from the last 30 days by using
MicroLog’s left and right keys:
To Next Page
Loading...