Chapter 2 MicroLog Plus
146
The new sensor will then appear in the External Sensor list in the
Setup dialog box.
2.5.5.
Sensor calibration
A new MicroLog comes fully calibrated. After a period of long
use, however, you may want to re-calibrate the humidity or the
temperature sensors.
The humidity calibration affects both MicroLog and MicroLog
plus and should be carried out while MicroLog is connected to the
PC. The temperature calibration affects only the MicroLog Plus
software and can be carried out regardless of whether MicroLog is
connected to the PC.
To Next Page
Loading...