Chapter 1 MicroLog
18
1.1. Overview
MicroLog can be used as a stand-alone device to monitor
temperature and humidity levels. All viewing, exporting and
printing of the data obtained is done with just two keys. MicroLog
continuously displays the most recent recordings, along with the
maximum and minimum values for a selected time interval. Users
can also define minimum and maximum alarm levels for a specific
shipment, and the display screen will begin to flash if either level is
breached.
(Instructions for using the Sound Alarm feature can be found in
section 3.1.1)
The data stored by MicroLog can be downloaded to any computer
for further viewing and analysis using the MicroLab software, and
can be exported to a spreadsheet.
To Next Page
Loading...