Fourier MicroLog - Temperature Calibration

To Next Page

To Previous Page

MicroLog Plus Chapter 2

151

3. Temperature calibration

1. Click Logger on the menu bar, then click Calibration.

2. Enter the calibration password, then click OK.

3. Select Temperature or Ext. Temperature in the

Choose sensor drop list.

4. Click the Default button to restore the original values.

5. Enter the two MicroLog values into the MicroLog Value

edit boxes.

6. Enter the two reference values into the Reference Value

edit boxes.

7. Click Calibrate.

To restore default calibration, click Default.