Chapter 2 MicroLog Plus
140
2.5.2. Auto setup
When setting-up multiple Cradles use the Auto Setup tool. This
tool will automatically set the minimum logging interval,
depending on the number of units you are using, and set the start
time for each unit.
To perform auto Setup:
1. Connect the first Cradle to the PC
2. Click Logger on the menu bar, then click Auto Setup
3. In the Number of units drop list select the number of
Cradles you are setting up, then click Start
4. Set up the first unit as you would normally
Note: the minimum logging interval is already set in the Interval
box and you cannot select a shorter time interval
To Next Page
Loading...