Fourier MicroLog - Defining a Custom Sensor

Chapter 1 MicroLog
76
To restore default calibration, click Default.
6. Defining a custom sensor
You can use MicroLog with any sensor that has a 0 – 20mA
current output or a 0 – 10V voltage output.
a. Click the Logger menu and then select Define new
sensors to open the Define New Sensor dialog box.
b. Click Add to add a new sensor to the list.
c. In the Based on drop list, select an external sensor that
matches your sensor’s output
d. Type the sensor’s name in the Sensor Name edit box.
e. Type the sensor’s unit in the Sensor Unit edit box.