MicroLog Plus Chapter 2
107
2.3.2. Meters view
Click Meters
on the main toolbar to switch to Meters
view.
In Meters view (the default view), the data for each MicroLog is
displayed in a separate window in meters. The number of active
meters in the window corresponds to the number of active sensors
in each MicroLog. the meters are updated every time MicroLab
Plus receives new data.
If a MicroLog is inactive the corresponding window becomes gray
and disabled.
There are six MicroLog windows in each display. If you are using
more than six MicroLogs, you can manually scroll to the other
displays, or let MicroLab Plus do this automatically.
To Next Page
Loading...