MicroLog Chapter 1
23
2. Once the left key is released, MicroLog will display the Min and
Max values of the sensors for the selected time period.
3. (Optional) Once the left key is released, the MicroLog will send
an IR signal of the Min and Max values for the selected time
period. To receive a printout of this data, simply point MicroLog to
the IR printer (HP portable printer – model No. 82240B).
3. Status messages
When both the left and right keys are pressed simultaneously, the
MicroLog LCD will display MicroLog’s status. This will also
“wake up” the device, a step necessary for its communication with
a computer. The status messages include:
To Next Page
Loading...