Fourier MicroLog - Defining a Custom Sensor

MicroLog Plus Chapter 2
143
2. Connect another Cradle to the PC, click Setup
on the main toolbar, then click Load Setup to load your
setup settings.
3. Change the Cradle ID
4. Change the comment (optional).
5. Click Send Setup.
2.5.4.
Defining a custom sensor
You can use MicroLog with any sensor that has a 0 – 20mA
current output or a 0 – 10V voltage output.
1. Click the Logger menu and then select Define New
Sensors to open the Define New Sensor dialog box.
2. Click Add to add a new sensor to the list.