MicroLog Chapter 1
35
2. Install the Software
1. Insert the CD into your CD drive.
2. The installation will start automatically. Once the process
begins, follow the on-screen instructions.
3. In case auto run is not working, open the CD drive folder
and double-click the setup icon, then follow the on-
screen instructions.
To un-install the software: From the Start menu select Settings /
Control Panel, and use the Add/Remove programs function to
remove the MicroLab application.
To install the USB driver (optional for cradle communication):
1. Insert the CD into your CD drive. If Installation begins
automatically (and you have already installed MicroLab),
click Cancel to stop installation
To Next Page
Loading...