Chapter 1 MicroLog
40
The data file name consists of the MicroLog name (Comment, see
page 59) and of the time and date at which it was saved.
To save data in a different location or under a different name, use
the Save as… command from the File menu:
d. Select Save as… from the File menu.
e. Enter a new name in the File name box
f. To save the data in a different folder, select a drive
and/or folder from the Save in box
g. Click Save
If you’ve downloaded data from more than one MicroLog and you
want to save all the data sets, select Save all from the File menu.
To Next Page
Loading...