Chapter 1 MicroLog
48
A graph icon indicates that the data set is currently being
displayed. Double click on the icon to clear the data set from the
display.
An empty icon indicates that the data set is not being
displayed. Double click on the icon to add the data set to the
display.
To collapse the sensor list under an individual MicroLog, click the
minus sign (-) next to the MicroLog icon.
To display the complete sensor list under an individual MicroLog,
click the plus sign (+) next to the MicroLog icon.
To remove an individual MicroLog from the Data Map, right-click
on its icon, then click Remove Data.
To Next Page
Loading...