MicroLog Chapter 1
81
Notes:
1. Enter an identification number for the cradle in the Unit ID
edit box. The number should be an integer between 1 and 200
and every cradle should have a different ID number. (We
recommend attaching a label with the ID number to every
cradle.)
2. The recording interval must be equal to or greater than 1
minute for recording data from one sensor, 2 minutes for 2
sensors and 3 minutes for 3 sensors.
c. Check the Daily download checkbox.
d. To set the download time and file location click Daily
download at the bottom of the setup dialog to open the
Daily download dialog box.
To Next Page
Loading...