MicroLog Plus Chapter 2
93
time intervals based on the criteria defined in their IDs. This
advanced feature prevents data collision between two or more
loggers.
The MicroLab Plus software reports on the status of up to 200
MicroLogs on a single color-coded interface. Other features that
help automate all aspects of the industrial data logging procedure
include the ability to store the data of each MicroLog, to set
MicroLog alarm levels and to define sampling intervals, as well as
any other necessary parameters.
The Logger menu handles all communication between the PC and
MicroLog such as programming the desired MicroLog and Cradle,
calibrating sensors, as well as defining new sensors.
The View menu controls the various data display options. Online
data can be viewed in multiple meters format (the default view), in
multiple graph format, or Cradle map format. The stored data can
be viewed on an off-line graph and table.
To Next Page
Loading...