EasyManuals Logo

Fronius Datamanager 2.0 User Manual

Fronius Datamanager 2.0
102 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
11
EN-US
Notes regarding
radio certification
The Fronius Datamanager 2.0 plug-in card and Fronius Datamanager Box 2.0 are
equipped with a wireless module.
Wireless modules in the USA require FCC certification:
Unless otherwise expressly permitted by the manufacturer, changes or modifications to the
wireless module are not allowed and lead to a loss of the right of use of the device by the
user.
Scope of Supply Fronius Datamanager 2.0 plug-in card
- 1 x Fronius Datamanager 2.0 plug-in card
- 1 x Fronius Solar Net termination plug
- 1 x 16-pin plug
- 1 x FCC sticker label, three parts
Additional equipment depending on the inverter:
FCC
This device conforms to the limit values for a Class B digital device, pursuant
to Part 15 of the FCC regulations. These limits are designed to provide rea-
sonable protection against harmful interference in a residential installation.
This device generates and uses high frequency energy and, if not used in
accordance with the instructions, may interfere with radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this device does cause harmful interference to radio or television recep-
tion, which can be determined by turning the device off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the distance between the device and the receiver.
- Connect the device to a different circuit than the receiver.
- Consult the dealer or an experienced radio/TV technician for help.
FCC ID: PV7-WIBEAR11N-DF1
Industry Canada RSS
This device complies with Industry Canada license-exempt RSS standards.
Operation is subject to the following two conditions:
(1) this device is not permitted to cause harmful interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.
IC ID: 7738A-WB11NDF1
- 1 x antenna
- 1 x Fronius Solar Net termination plug
Fronius Galvo
Fronius Symo
Fronius Primo
- 1 x antenna
- 1 x 1 m RG58 antenna cable
- 1 x mounting bracket
- 1 x double-sided adhesive tape
Fronius IG
Fronius IG Plus
Fronius IG Plus V

Table of Contents

Other manuals for Fronius Datamanager 2.0

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fronius Datamanager 2.0 and is the answer not in the manual?

Fronius Datamanager 2.0 Specifications

General IconGeneral
Monitoring PlatformFronius Solar.web
Communication InterfacesEthernet
ProtocolsModbus TCP
Data LoggingIntegrated data logger
Web InterfaceYes
CompatibilityFronius inverters
Power SupplyVia inverter
MountingWall mounting

Related product manuals