86
Settings – Counter
General IMPORTANT! Settings in the "Counter" menu item may only be entered by staff trained to
do so!
The service password must be entered for the "Counter" menu item.
Counter
(1) Field for selecting a counter:
- none selected
- Fronius Smart Meter
- S0 inverter (for Fronius Galvo, Fronius Symo,
and Fronius Primo inverters only)
(2) Link to counter circuit diagrams
(3) "Apply/Save" button
(4) "Cancel/Discard entries" button
Fronius Smart
Meter
Recording self-consumption using Fronius Smart Meter
(1a) Counter position at feed-in point
The power of feeding in and energy are measured. The consumption is determined
using these values and the system data.
(1b) Counter position in consumption branch
The power consumed and energy are measured directly. The power of feeding in
and energy are determined using these values and the system data.
(1)
(2)
(3) (4)
(1)
(2)
(1a) (1b)