Fronius Datamanager 2.0 User Manual

75
EN-US
(3) Obtain IP address statically
The user enters a fixed IP address for Fronius Datamanager 2.0 and also manually
sets the subnet mask, gateway address, and DNS server address (from the pro-
vider).
(4) Obtain IP address dynamically
Fronius Datamanager 2.0 obtains its IP address from a DHCP server (DHCP = dy-
namic host configuration protocol).
The DHCP server must be configured so that Fronius Datamanager 2.0 is always
assigned the same IP address. You will then always know the IP address at which
Fronius Datamanager 2.0 can be found.
If the DHCP server supports the "DNS dynamic updates" function, a name can be
entered for Fronius Datamanager 2.0 in the "Host name" field. The connection to
Fronius Datamanager 2.0 can then be established using the name instead of the
IP address.
For example: Host name = sample_system, domain name = fronius.com.
Fronius Datamanager 2.0 can be reached via the address "sample_system.fro-
nius.com."
(5) Field for entering a host name for dynamically obtained IP address
(6) Field for entering the IP address for static IP address
(7) Field for entering the subnet mask for static IP address
(8) Field for entering the gateway for static IP address
(9) Field for entering the DNS server for static IP address
WLAN
(10) Display of detected WLAN networks
(11) "Refresh" button
Used to search again for available WLAN networks
(12) Display of signal quality
One bar = low signal strength
Three bars = high signal strength
(13) Network status
Open/secured/saved [after pressing the "Setup" button (16)]
(14) Encryption display
WPA / WPA2 / WEP
(15) Add WLAN
Used to display hidden networks
Clicking this option opens the "WLAN connection" window

Fronius Datamanager 2.0 Specifications

General

Monitoring Platform	Fronius Solar.web
Communication Interfaces	Ethernet
Protocols	Modbus TCP
Data Logging	Integrated data logger
Web Interface	Yes
Compatibility	Fronius inverters
Power Supply	Via inverter
Mounting	Wall mounting